Kawasaki Heavy Industries Ltd

Private Bag 24

Rydalmere NSW 2116

AUSTRALIA

 

ATTENTION: Mr David Woodward

 

 

Dear Mr Woodward

 

The application for a compliance plate approval, your reference number EX250H/p, our reference number 8362, lodged for Kawasaki Heavy Industries Ltd, has been approved.

 

Your approval number is 8362 and the approval documents are attached.

 

 

 

 

 

 

 

for Administrator of Vehicle Standards

02 July 2001

 

 

Department of Transport and Regional Services

 

MOTOR VEHICLE STANDARDS ACT 1989

Section 10A.(1) Approval

 

Approval No.: 8362

Issue date: 02 July 2001

 

The Administrator of Vehicle Standards (the Administrator) approves the affixing, by the Licensee named and described in Schedule 1 (the Licensee) to a vehicle of the kind described in Schedule 2 which conforms to the design as specified in the evidence items listed in Schedule 4 (the specified vehicle) which the Licensee has certified complies with the Australian Design Rules specified in Schedule 4, of an Identification Plate of the colour specified in Schedule 3, that conforms with the Administrator’s circular 0-3-2, and which contains the information shown in Schedule 2 (with the typical VIN replaced with the relevant VIN).

 

In this approval, a reference to an Australian Design Rule is a reference to a rule cited in the National Standard determinations, made under section 7 of the Motor Vehicle Standards Act, together with that rule’s distinguishing number.

 

This approval is subject to the following conditions.

 

  1. The Licensee shall not affix the Identification Plate to a vehicle that is not a specified vehicle.
  2. The Licensee must not place Identification Plates on vehicles which do not comply with all of the Australian Design Rules specified in Schedule 4.
  3. The Licensee shall not without the prior approval of the Administrator affix the Identification Plate to a vehicle that is in any way different from the vehicle described in the final form of the application for this Approval. The application includes reports and other documents relating to the application.
  4. The Licensee shall by detailed quality control and test ensure continuing compliance with such of the Australian Design Rules specified in Schedule 4.
  5. The Licensee shall maintain records of detailed quality control and test documentation.
  6. The Licensee shall supply upon request, to the satisfaction of the Administrator, any additional information for the purpose of demonstrating compliance with such of the Australian Design Rules specified in Schedule 4.
  7. The Licensee shall not affix the Identification Plate to a vehicle on or after the implementation date for a new Australian Design Rule applicable to the specified vehicle.
  8. The Licensee shall not affix the Identification Plate to a vehicle on or after the Expiry date specified in Schedule 3 (if any).
  9. The Identification Plate shall be affixed to the vehicle to which it relates in the position specified as Plate Location in Schedule 3.
  10. On cessation of marketing the specified vehicle in Australia, the Licensee shall notify the Administrator of the date of manufacture and VIN of the last specified vehicle supplied to the market in Australia.

 

 

Approval No.: 8362 Issue Date: 02 July 2001

Schedule 1

Kawasaki Heavy Industries Ltd

1-1 Kawasaki - Cho

Akashi 673

Hyogo Prefecture

- -

JAPAN

 

Schedule 2

Make : KAWASAKI

Model : EX250H

Category : LC

Manufactured by : Kawasaki Heavy Industries Ltd

Typical VIN : JKAEXMH12LA000001

Seating Capacity : 2

 

Schedule 3

Expiry date : Life of Model

Plate location : RIGHT SIDE OF MAIN FRAME (15-F-15) (ADHESIVE LABEL)

Plate colour : SILVER (ADH LABEL)

 

 

Administrator of Vehicle Standards

Date:

 

Please note: If you do not comply with a condition specified in this Approval the Administrator may, after giving you notice, revoke the Approval.

 

Approval No.: 8362 Issue Date: 02 July 2001

 

Schedule 4

 

ADR Document Reference from evidence item

 

07/00 NRI000000275

07/00 NRI000000276

14/02 EX250H/PA

18/02 (using 18/00) EX250H/90

19/02 (using 19/01) EX250H/90-A

24/02 (using 24/01) EX250H/90

33/00 BRK-799

39/00 21-09-161

41/00 EX250H/90

42/03 (using 42/00) EX250H/90

42/03 (using 42/01) EX250H/90-A

43/04 (using 43/01) EX250H/90

43/04 (using 43/02) EX250H/90-A

47/00 STN-839

51/00 EX250H/90-A

53/00 4716

53/00 4716RPL

53/00 STN-1024

53/00 STN-1025B

55/00 STN-1016A

57/00 EX250H/90

61/02 EX250H/PA