Honda Motor Co. Ltd

Locked Bag 95

TULLAMARINE VIC 3043

ATTENTION: Mr Paul Sayers

 

Dear Mr Sayers

The application for a compliance plate approval, your reference number M07MELCA101, our reference number 32052, lodged for Honda Motor Co. Ltd, has been approved.

Your approval number is 32052 and the approval documents are attached.

Yours sincerely

 

 

 

 

for Administrator of Vehicle Standards

06 December 2006

 

 

 

 

 

 

 

 

 

 

GPO Box 594 Canberra ACT 2601 Telephone: (02) 6274 7111 Facsimile: (02) 6274 6013 www.dotars.gov.au/rvcs

 

Department of Transport and Regional Services

MOTOR VEHICLE STANDARDS ACT 1989

Section 10A.(1) Approval

 

Approval No.: 32052

Issue date: 29 November 2006

The Administrator of Vehicle Standards (the Administrator) approves the affixing, by the Licensee named and described in Schedule 1 (the Licensee) to a vehicle of the kind described in Schedule 2 which conforms to the design as specified in the evidence items listed in Schedule 4 (the specified vehicle) which the Licensee has certified complies with the Australian Design Rules specified in Schedule 4, of an Identification Plate of the colour specified in Schedule 3, that conforms with the Administrator’s circular 0-3-2, and which contains the information shown in Schedule 2 (with the typical VIN replaced with the relevant VIN).

In this approval, a reference to an Australian Design Rule is a reference to a rule cited in the National Standard determinations, made under section 7 of the Motor Vehicle Standards Act, together with that rule’s distinguishing number.

This approval is subject to the following conditions.

  1. The Licensee shall not affix the Identification Plate to a vehicle that is not a specified vehicle.
  2. The Licensee must not place Identification Plates on vehicles which do not comply with all of the Australian Design Rules specified in Schedule 4.
  3. The Licensee shall not without the prior approval of the Administrator affix the Identification Plate to a vehicle that is in any way different from the vehicle described in the final form of the application for this Approval. The application includes reports and other documents relating to the application.
  4. The Licensee shall by detailed quality control and test ensure continuing compliance with such of the Australian Design Rules specified in Schedule 4.
  5. The Licensee shall maintain records of detailed quality control and test documentation.
  6. The Licensee shall supply upon request, to the satisfaction of the Administrator, any additional information for the purpose of demonstrating compliance with such of the Australian Design Rules specified in Schedule 4.
  7. The Licensee shall not affix the Identification Plate to a vehicle on or after the implementation date for a new Australian Design Rule applicable to the specified vehicle.
  8. The Licensee shall not affix the Identification Plate to a vehicle on or after the Expiry date specified in Schedule 3 (if any).
  9. The Identification Plate shall be affixed to the vehicle to which it relates in the position specified as Plate Location in Schedule 3.
  10. On cessation of marketing the specified vehicle in Australia, the Licensee shall notify the Administrator of the date of manufacture and VIN of the last specified vehicle supplied to the market in Australia.

Approval No.: 32052 Issue Date: 29 November 2006

Schedule 1

Honda Motor Co. Ltd

1-1 2 Chome

Minami-Aoyama Minato-ku

Tokyo 107

JAPAN

 

Schedule 2

Make : HONDA

Model : CBR1000RR

Category : LC

Manufactured by : Honda Motor Co. Ltd

Typical VIN : JH2SC57U64M000001

Seating Capacity : 2

 

Schedule 3

Expiry date : Life of Model

Plate location : L.H. SIDE OF MAIN FRAME

Plate colour : BLACK AND SILVER

 

Administrator of Vehicle Standards

Date:

Please note: If you do not comply with a condition specified in this Approval the Administrator may, after giving you notice, revoke the Approval.

Approval No.: 32052 Issue Date: 29 November 2006

Schedule 4

ADR Document Reference from evidence item

14/02 M04MELSE1411

18/02 M04MELSE1811

18/03 M06MELSE1811

19/02 (using 19/01) M04MELSE1911

19/02 (using 19/01) M06MELSE1911

33/00 M04MELSE3311

33/00 M06MELSE3311

42/04 M05MELSE4211

42/04 M06MELSE4211

43/04 M04MELSE4311

43/04 M06MELSE4311

47/00 M04MELSE4711

51/00 M04MELSE5111

53/00 M04MELSE5311

53/00 M04MELSE5321

53/00 M04MELSE5331

53/00 M04MELSE5341

53/00 M04MELSE5351

53/00 M06MELSE5311

53/00 M06MELSE5321

53/00 M06MELSE5331

55/00 M04MELSE5511

57/00 M04MELSE5711

57/00 M06MELSE5711

61/02 A04MELSE6111

83/00 M06MELSE8311