Pedders Shock Absorber Service Pty Ltd
PO Box 247
NOBLE PARK VIC 3174
ATTENTION:
Mr David Schneiders
Dear Mr Schneiders
The application for a Identification Plate Approval, your reference number D40GVMCA04, our reference number 45684, lodged for Pedders Shock Absorber Service Pty Ltd, has been approved.
Your approval number is 45684 and the approval documents are attached.
Yours sincerely
Umesh Shamdasani
Associate Administrator of Vehicle Standards
07 February 2014
GPO Box 594 Canberra ACT 2601 Telephone: (02) 6274 7111 Facsimile: (02) 6274 7477 http://rvcs.infrastructure.gov.au/
Department of Infrastructure and Regional Development
MOTOR VEHICLE STANDARDS ACT 1989
Section 10A.(1) Approval
Approval No.: 45684
Issue date: 07 February 2014
The Administrator of Vehicle Standards (the Administrator) approves the affixing, by the Licensee named and described in Schedule 1 (the Licensee) to a vehicle of the kind described in Schedule 2 which conforms to the design as specified in the evidence items listed in Schedule 4 (the specified vehicle) which the Licensee has certified complies with the Australian Design Rules specified in Schedule 4, of an Identification Plate of the colour specified in Schedule 3, that conforms with the Administrator’s circular 0-3-2, and which contains the information shown in Schedule 2 (with the typical VIN replaced with the relevant VIN).
In this approval, a reference to an Australian Design Rule is a reference to a rule cited in the National Standard determinations, made under section 7 of the Motor Vehicle Standards Act, together with that rule’s distinguishing number.
The licensee must pay a fee to the Commonwealth, in accordance with Regulation 60 and Items 1 and 2 of Schedule 2 of the Motor Vehicle Standards Regulations, for the placement of an identification plate on each new vehicle supplied to the market in Australia in accordance with the approval. The administrative arrangements for the payment of fees are set out in Administrator’s Circular 0-3-2. Where a condition exists in Schedule 5 of the approval for the licensee to obtain plates through the Authorised Plate Contractor, this fee is collected as part of that process.
This approval is subject to the following conditions.
Approval No.: 45684 Issue Date: 07 February 2014
Schedule 1
Pedders Shock Absorber Service Pty Ltd
6 Bridge Road
KEYSBOROUGH
VIC 3173
Schedule 2
Make : PEDDERS NISSAN
Model : D40 NAVARA
Category : NA
Manufactured by : Pedders Shock Absorber Service Pty Ltd
Typical VIN : VSKCND40A04172643
Seating Capacity : 2; 3; 4; 5
GVM : 3.215 tonne TO 3.215 tonne
Schedule 3
Expiry date : Life of Model
Plate location : 10 O 20
Plate colour : SILVER
Umesh Shamdasani
Associate Administrator of Vehicle Standards
07 February 2014
Please note: If you do not comply with a condition specified in this Approval the Administrator may, after giving you notice, revoke the Approval.
Approval No.: 45684 Issue Date: 07 February 2014
Schedule 4
ADR Document Reference from evidence item
01/00 D40ADR0100
02/01 D40ADR0201-1
03/03 D40ADR0303-1
04/05 D40ADR0405
05/05 D40ADR0505-1
06/00 D40ADR0600
08/01 D40ADR0801
11/00 D40ADR1100
13/00 D40ADR1300
14/02 D40ADR1402
18/03 D40ADR1803
23/02 (also satisfying 23/01) D40ADR2302
23/02 D40ADR2302
25/02 D40ADR2502
30/01 D40ADR3001
35/03 (also satisfying 31/02) SED403503-3
35/03 (also satisfying 31/03) SED403503-3
31/35SF SFD40ADR3503
35/03 SED403503-3
35/03 (also satisfying 35/04) SED403503-3
42/04 D40ADR4204
43/04 D40ADR4304
46/00 D40ADR4600
47/00 D40ADR4700
48/00 D40ADR4800
49/00 D40ADR4900
50/00 D40ADR5000
51/00 D40ADR5100
61/02 D40ADR6102
62/02 D40ADR6202
62/02 (using 62/01) D40ADR6201
79/03 D40ADR7903
81/02 D40ADR8102
83/00 D40ADR8300