Fiat Auto S.p.A.

Peter L Smith Engineering P/L

14 Little Street

CAMDEN NSW 2570

ATTENTION: Mr Mauro Fantozzi

 

Dear Mr Fantozzi

The application for a compliance plate approval, your reference number 939CARR, our reference number 35521, lodged for Fiat Auto S.p.A., has been approved.

Your approval number is 35521 and the approval documents are attached.

Yours sincerely

 

 

 

 

for Administrator of Vehicle Standards

07 July 2006

 

 

 

 

 

 

 

 

 

 

GPO Box 594 Canberra ACT 2601 Telephone: (02) 6274 7111 Facsimile: (02) 6274 6013 www.dotars.gov.au/rvcs

 

Department of Transport and Regional Services

MOTOR VEHICLE STANDARDS ACT 1989

Section 10A.(2) Approval

 

Approval No.: 35521

Issue date: 06 July 2006

The Administrator of Vehicle Standards (the Administrator) approves the affixing, by the Licensee named and described in Schedule 1 (the Licensee) to a vehicle of the kind described in Schedule 2 which conforms to the design as specified in the evidence items listed in Schedule 4 (the specified vehicle) which the Licensee has certified complies with the Australian Design Rules specified in Schedule 4, of an Identification Plate of the colour specified in Schedule 3, that conforms with the Administrator’s circular 0-3-2, and which contains the information shown in Schedule 2 (with the typical VIN replaced with the relevant VIN).

In this approval, a reference to an Australian Design Rule is a reference to a rule cited in the National Standard determinations, made under section 7 of the Motor Vehicle Standards Act, together with that rule’s distinguishing number.

This approval is subject to the following conditions.

  1. The Licensee shall not affix the Identification Plate to a vehicle that is not a specified vehicle.
  2. The Licensee must not place Identification Plates on vehicles which do not comply with all of the Australian Design Rules specified in Schedule 4.
  3. The Licensee shall not without the prior approval of the Administrator affix the Identification Plate to a vehicle that is in any way different from the vehicle described in the final form of the application for this Approval. The application includes reports and other documents relating to the application.
  4. The Licensee shall by detailed quality control and test ensure continuing compliance with such of the Australian Design Rules specified in Schedule 4.
  5. The Licensee shall maintain records of detailed quality control and test documentation.
  6. The Licensee shall supply upon request, to the satisfaction of the Administrator, any additional information for the purpose of demonstrating compliance with such of the Australian Design Rules specified in Schedule 4.
  7. The Licensee shall not affix the Identification Plate to a vehicle on or after the implementation date for a new Australian Design Rule applicable to the specified vehicle.
  8. The Licensee shall not affix the Identification Plate to a vehicle on or after the Expiry date specified in Schedule 3 (if any).
  9. The Identification Plate shall be affixed to the vehicle to which it relates in the position specified as Plate Location in Schedule 3.
  10. On cessation of marketing the specified vehicle in Australia, the Licensee shall notify the Administrator of the date of manufacture and VIN of the last specified vehicle supplied to the market in Australia.
  11. The Licensee shall also comply with the additional conditions specified in Schedule 5.

Approval No.: 35521 Issue Date: 06 July 2006

Schedule 1

Fiat Auto S.p.A.

C.SO Agnelli

220 - 10135

TURIN

ITALY

 

Schedule 2

Make : ALFA ROMEO

Model : 159 SERIES

Category : MA

Manufactured by : Fiat Auto S.p.A.

Typical VIN : ZAR93900012345678

Seating Capacity : 5

 

Schedule 3

Expiry date : Life of Model

Plate location : IN LUGGAGE COMPARTMENT ON LHR FLOOR PANEL

Plate colour : SILVER

 

Administrator of Vehicle Standards

Date:

Please note: If you do not comply with a condition specified in this Approval the Administrator may, after giving you notice, revoke the Approval.

Approval No.: 35521 Issue Date: 06 July 2006

Schedule 4

ADR Document Reference from evidence item

01/00 939/01/00

02/00 939/02/00

03/02 939/03/00

03/02 939/03/01

03/02 939/03/02

03/02 939/03/03

04/03 939/04/00

04/03 939/04/01

05/04 939/05/00

05/04 939/05/01

06/00 939/06/00

06/00 939/06/01

06/00 939/06/02

08/01 939/08/00

08/01 939/08/01

11/00 939/11/00

11/00 939/11/00R

13/00 939/13/00

14/02 939/14/00

14/02 939/14/01

14/02 939/14/02

18/03 939/18/00

21/00 939/21/00

21/00 939/21/01

22/00 939/22/00

23/01 939/23/00

23/01 939/23/00R

23/01 939/23/01

23/01 939/23/01R

23/01 939/23/02

23/01 939/23/02R

23/01 939/23/03

25/02 939/25/00

29/00 939/29/00

30/01 939/30/00R

30/01 939/30/01R

31/01 939/31/00

31/01 939/31/01

31/01SF 939/31/SF1R

31/01SF 939/31/SF2

34/01 939/34/00R

34/01 939/34/01

42/04 939/42/00

43/04 939/43/00

43/04 939/43/00R

43/04 939/43/01

46/00 939/46/00

46/00 939/46/01

47/00 939/47/00

48/00 939/48/00

49/00 939/49/00

49/00 939/49/01

49/00 939/49/02

49/00 939/49/03

49/00 939/49/04

49/00 939/49/04R

50/00 939/50/00

51/00 939/51/00

52/00 939/52/00

61/02 939/61/00 (Minor Non-Compliance, see Schedule 5)

69/00 939/69/00

72/00 939/72/00

73/00 939/73/00

73/00 939/73/01

75/00 939/75/00R

77/00 939/77/00

78/00 939/78/00

78/00 939/78/01

79/01 939/79/00

79/01 939/79/01R

79/01 939/79/01RR

79/01 939/79/02R

79/01 939/79/02RR

79/01 939/79/03

79/02 939/79/00R

79/02 939/79/03R

81/01 939/81/00

81/01 939/81/01

81/01 939/81/02

81/01 939/81/03

81/01 939/81/04

81/01 939/81/06

81/01 939/81/07

81/01SF 939/81/SF1

81/01SF 939/81/SF2

82/00 939/82/00

83/00 939/83/00R

83/00 939/83/01

83/00 939/83/02

83/00 939/83/03

83/00SF 939/83/SF1

83/00SF 939/83/SF2

Approval No.: 35521 Issue Date: 06 July 2006

Schedule 5

 

 

1. Vehicle does not comply with ADR 61/02 clause 9.1.1.2. Provision is made for mounting a registration plate to be affixed to the front of the vehicle at an angle of 18 degrees to a plane parallel to the front axle.

This non-compliance is minor and inconsequential.