Honda Motor Co. Ltd

Locked Bag 95

TULLAMARINE VIC 3043

AUSTRALIA

ATTENTION: Mr Paul Sayers

 

Dear Mr Sayers

The application for a compliance plate approval, your reference number K10MFLCA101, our reference number 39337, lodged for Honda Motor Co. Ltd, has been approved.

Your approval number is 39337 and the approval documents are attached.

Yours sincerely

 

 

 

 

for Administrator of Vehicle Standards

11 August 2009

 

 

 

 

 

 

 

 

 

 

GPO Box 594 Canberra ACT 2601 Telephone: (02) 6274 7111 Facsimile: (02) 6274 7477 http://rvcs.infrastructure.gov.au/

 

Department of Infrastructure, Transport,
Regional Development and Local Government

MOTOR VEHICLE STANDARDS ACT 1989

Section 10A.(1) Approval

 

Approval No.: 39337

Issue date: 07 August 2009

The Administrator of Vehicle Standards (the Administrator) approves the affixing, by the Licensee named and described in Schedule 1 (the Licensee) to a vehicle of the kind described in Schedule 2 which conforms to the design as specified in the evidence items listed in Schedule 4 (the specified vehicle) which the Licensee has certified complies with the Australian Design Rules specified in Schedule 4, of an Identification Plate of the colour specified in Schedule 3, that conforms with the Administrator’s circular 0-3-2, and which contains the information shown in Schedule 2 (with the typical VIN replaced with the relevant VIN).

In this approval, a reference to an Australian Design Rule is a reference to a rule cited in the National Standard determinations, made under section 7 of the Motor Vehicle Standards Act, together with that rule’s distinguishing number.

This approval is subject to the following conditions.

  1. The Licensee shall not affix the Identification Plate to a vehicle that is not a specified vehicle.
  2. The Licensee must not place Identification Plates on vehicles which do not comply with all of the Australian Design Rules specified in Schedule 4.
  3. The Licensee shall not without the prior approval of the Administrator affix the Identification Plate to a vehicle that is in any way different from the vehicle described in the final form of the application for this Approval. The application includes reports and other documents relating to the application.
  4. The Licensee shall by detailed quality control and test ensure continuing compliance with such of the Australian Design Rules specified in Schedule 4.
  5. The Licensee shall maintain records of detailed quality control and test documentation.
  6. The Licensee shall supply upon request, to the satisfaction of the Administrator, any additional information for the purpose of demonstrating compliance with such of the Australian Design Rules specified in Schedule 4.
  7. The Licensee shall not affix the Identification Plate to a vehicle on or after the implementation date for a new Australian Design Rule applicable to the specified vehicle.
  8. The Licensee shall not affix the Identification Plate to a vehicle on or after the Expiry date specified in Schedule 3 (if any).
  9. The Identification Plate shall be affixed to the vehicle to which it relates in the position specified as Plate Location in Schedule 3.
  10. On cessation of marketing the specified vehicle in Australia, the Licensee shall notify the Administrator of the date of manufacture and VIN of the last specified vehicle supplied to the market in Australia.

Approval No.: 39337 Issue Date: 07 August 2009

Schedule 1

Honda Motor Co. Ltd

1-1 2 Chome

Minami-Aoyama Minato-ku

Tokyo 107

JAPAN

 

Schedule 2

Make : HONDA

Model : CBR1000RR8

Category : LC

Manufactured by : Honda Motor Co. Ltd

Typical VIN : JH2SC59U3AK200001

Seating Capacity : 2

 

Schedule 3

Expiry date : Life of Model

Plate location : L.H. SIDE OF STEERING HEAD PIPE OF FRAME

Plate colour : BLACK AND SILVER

 

Administrator of Vehicle Standards

Date:

Please note: If you do not comply with a condition specified in this Approval the Administrator may, after giving you notice, revoke the Approval.

Approval No.: 39337 Issue Date: 07 August 2009

Schedule 4

ADR Document Reference from evidence item

14/02 M08MFLSE1411

18/03 K09MFLSE1811

18/03 M08MFLSE1811

19/02 (using 19/01) K09MFLSE1911

19/02 (using 19/01) K10MFLSE1911

19/02 (using 19/01) M08MFLSE1911

33/00 K09MFLSE3311

33/00 K09MFLSE3321

33/00 M08MFLSE3311

42/04 K09MFLSE4211

42/04 K10MFLSE4211

42/04 M08MFLSE4211

43/04 K09MFLSE4311

43/04 K10MFLSE4311

43/04 M08MFLSE4311

46/00 M08MFLSE4611

47/00 M08MFLSE4711

47/00 M08MFLSE4721

51/00 K09MFLSE5111

51/00 M08MFLSE5111

53/00 K09MFLSE5311

53/00 K10MFLSE5331

53/00 M08MFLSE5311

53/00 M08MFLSE5321

53/00 M08MFLSE5331

53/00 M08MFLSE5341

53/00 M08MFLSE5351

53/00 M08MFLSE5361

46/00 (also satisfying 55/00) M08MFLSE4611

57/00 K09MFLSE5711

57/00 K10MFLSE5711

57/00 M08MFLSE5711

61/02 M08MFLSE6111

83/00 K09MFLSE8311

83/00 K09MFLSE8321

83/00 K10MFLSE8311

83/00 K10MFLSE8321

83/00 M08MFLSE8311

83/00SF K09MFLSF8311

83/00SF K10MFLSF8311