Blade Electrical Vehicles Pty Ltd
PO Box 131
HARCOURT VIC 3453
ATTENTION: Mr Ross
Blade
Dear Mr Blade
The application for a compliance plate approval, your reference number 0260309A2, our reference number 41245, lodged for Blade Electrical Vehicles Pty Ltd, has been approved.
Your approval number is 41245 and
the approval documents are attached.
Yours sincerely
for Administrator of Vehicle Standards
09 April 2010
Issue date: 09 February 2010
The Administrator of Vehicle Standards (the Administrator) approves the
affixing, by the Licensee named and described in Schedule 1 (the Licensee) to a
vehicle of the kind described in Schedule 2 which conforms to the design as
specified in the evidence items listed in Schedule 4 (the specified vehicle)
which the Licensee has certified complies with the Australian Design Rules
specified in Schedule 4, of an Identification Plate of the colour specified in
Schedule 3, that conforms with the Administrator’s circular 0-3-2, and which
contains the information shown in Schedule 2 (with the typical VIN replaced
with the relevant VIN).
In this approval, a reference to an Australian
Design Rule is a reference to a rule cited in the National Standard
determinations, made under section 7 of the Motor Vehicle Standards Act,
together with that rule’s distinguishing number.
This approval is subject to
the following conditions.
1.
The Licensee shall not affix
the Identification Plate to a vehicle that is not a specified vehicle.
2.
The Licensee must not place
Identification Plates on vehicles which do not comply with all of the
Australian Design Rules specified in Schedule 4.
3.
The Licensee shall not
without the prior approval of the Administrator affix the Identification Plate
to a vehicle that is in any way different from the vehicle described in the
final form of the application for this Approval. The application includes
reports and other documents relating to the application.
4.
The Licensee shall by
detailed quality control and test ensure continuing compliance with such of the
Australian Design Rules specified in Schedule 4.
5.
The Licensee shall maintain
records of detailed quality control and test documentation.
6.
The Licensee shall supply
upon request, to the satisfaction of the Administrator, any additional
information for the purpose of demonstrating compliance with such of the
Australian Design Rules specified in Schedule 4.
7.
The Licensee shall not affix
the Identification Plate to a vehicle on or after the implementation date for a
new Australian Design Rule applicable to the specified vehicle.
8.
The Licensee shall not affix
the Identification Plate to a vehicle on or after the Expiry date specified in
Schedule 3 (if any).
9.
The Identification Plate
shall be affixed to the vehicle to which it relates in the position specified
as Plate Location in Schedule 3.
10.
On cessation of marketing
the specified vehicle in Australia, the Licensee shall notify the Administrator
of the date of manufacture and VIN of the last specified vehicle supplied to
the market in Australia.
11.
The Licensee shall also
comply with the additional conditions specified in Schedule 5.
Approval No.: 41245 Issue Date: 09 February
2010
Schedule
1
Blade Electrical Vehicles Pty Ltd
2 Hitchcock ST
CASTLEMAINE
VIC
3450
Schedule
2
Make :
BEV HYUNDAI
Model :
GETZ ELECTRIC
Category :
MA
Manufactured by :
Blade Electrical Vehicles Pty Ltd
Typical VIN :
KMHBT51DR6U123456
Seating Capacity :
4
Schedule
3
Expiry date : Life of Model
Plate location : Left
A-pillar below the 1-st manufacturer's
plate
Plate colour : GREEN
Administrator of Vehicle Standards
09 February 2010
Please note: If
you do not comply with a condition specified in this Approval the Administrator
may, after giving you notice, revoke the Approval.
Approval No.: 41245 Issue Date: 09 February
2010
Schedule
4
ADR Document Reference from evidence item
01/00
0260309-01
06/00 0260309-06
08/01
0260309-08
11/00
0260309-11
13/00
0260309-13
14/02 0260309-14
18/03
0260309-18
21/00
0260309-21
23/01
0260309-23A
25/02 0260309-25
31/01
0260309-31
31/35SF
0260309-31F
34/01
0260309-34
42/04
0260309-42
43/04
0260309-43
46/00
0260309-46
47/00
0260309-47
48/00
0260309-48
49/00
0260309-49
50/00
0260309-50
51/00
0260309-51
52/00
0260309-52
60/00 0260309-60
61/02
0260309-61
69/00
0260309-69
69/00
0260309-69A
72/00
0260309-72
73/00
0260309-73
73/00
0260309-73A
82/00
0260309-82
83/00 0260309-83
83/00SF
0260309-83F
Approval No.: 41245 Issue Date: 09 February
2010
Schedule
5
The Licensee to whom this Approval is issued is limited to placing
Identification Plates to no more than 100 vehicles within each 12 month period,
following the date of issue of the approval, to vehicles within the Category
specified in Schedule 2. This vehicle limit applies regardless of the number of
Approvals the Licensee may hold.
The Licensee must obtain all Identification Plates from the
Administrator, as per the contract approved by the Administrator for the supply
of Identification Plates, currently with -:
Niddrie Nameplates Pty Ltd
P.O.Box 106
Niddrie
VIC 3042
Phone: (03)
9335 2977
Facsimile (03) 9335 4357