Zero Motorcycles Inc
170 Technology Circle
Scotts Valley California 95066
U.S.A
ATTENTION:
Mr Derek Yuen
Dear Mr Yuen
The application for a Identification Plate Approval, your reference number ZMZ1CA000C00, our reference number 44152, lodged for Zero Motorcycles Inc, has been approved.
Your approval number is 44152 and the approval documents are attached.
Yours sincerely
for Administrator of Vehicle Standards
13 June 2012
GPO Box 594 Canberra ACT 2601 Telephone: (02) 6274 7111 Facsimile: (02) 6274 7477 http://rvcs.infrastructure.gov.au/
Department of Infrastructure and Transport
MOTOR VEHICLE STANDARDS ACT 1989
Section 10A.(1) Approval
Approval No.: 44152
Issue date: 13 June 2012
The Administrator of Vehicle Standards (the Administrator) approves the affixing, by the Licensee named and described in Schedule 1 (the Licensee) to a vehicle of the kind described in Schedule 2 which conforms to the design as specified in the evidence items listed in Schedule 4 (the specified vehicle) which the Licensee has certified complies with the Australian Design Rules specified in Schedule 4, of an Identification Plate of the colour specified in Schedule 3, that conforms with the Administrator’s circular 0-3-2, and which contains the information shown in Schedule 2 (with the typical VIN replaced with the relevant VIN).
In this approval, a reference to an Australian Design Rule is a reference to a rule cited in the National Standard determinations, made under section 7 of the Motor Vehicle Standards Act, together with that rule’s distinguishing number.
The licensee must pay a fee to the Commonwealth, in accordance with Regulation 60 and Items 1 and 2 of Schedule 2 of the Motor Vehicle Standards Regulations, for the placement of an identification plate on each new vehicle supplied to the market in Australia in accordance with the approval. The administrative arrangements for the payment of fees are set out in Administrator’s Circular 0-3-2. Where a condition exists in Schedule 5 of the approval for the licensee to obtain plates through the Authorised Plate Contractor, this fee is collected as part of that process.
This approval is subject to the following conditions.
Approval No.: 44152 Issue Date: 13 June 2012
Schedule 1
Zero Motorcycles Inc
170 Technology Circle
Scotts Valley
California 95066
U.S.A
Schedule 2
Make : ZERO
Model : Z1
Category : LC
Manufactured by : Zero Motorcycles Inc
Typical VIN : 538SD3M37CCB00001
Seating Capacity : 1
Schedule 3
Expiry date : Life of Model
Plate location : On the Right Hand Side upper frame member just rear of steering head (31-N-15)
Plate colour : WHITE
Robert Hogan
Administrator of Vehicle Standards
13 June 2012
Please note: If you do not comply with a condition specified in this Approval the Administrator may, after giving you notice, revoke the Approval.
Approval No.: 44152 Issue Date: 13 June 2012
Schedule 4
ADR Document Reference from evidence item
14/02 ZMZ11402EC00
18/03 ZMZ11803EC00
18/03 ZMZ11803EC01
18/03 ZMZ11803EC03
18/03 ZMZ11803EC05
18/03 ZMZ11803EC06
18/03 ZMZ11803EC07
19/02 ZMZ11902EC00
33/00 ZMZ13300EC00
42/04 ZMZ14204EC00
43/04 ZMZ14304EC00
46/00 ZMZ14600EC00
47/00 ZMZ14700EC00
47/00 ZMZ14700EC01
47/00 ZMZ14700EC02
51/00 ZMZ15100EC00
53/00 ZMZ15300EC00
53/00 ZMZ15300EC01
53/00 ZMZ15300EC02
53/00 ZMZ15300EC03
53/00 ZMZ15300EC04
53/00 ZMZ15300EC05
46/00 (also satisfying 55/00) ZMZ14600EC00
57/00 ZMZ15700EC00
61/02 ZMZ16102EC00
62/02 ZMZ16202EC00
83/00 ZMZ18300EC00
83/00 ZMZ18300EC01
83/00 ZMZ18300EC02
83/00 ZMZ18300EC03
83/00SF ZMZ18300FC00