Jenkins Springs Pty Ltd

PO Box 398

BASSENDEAN WA 6934

ATTENTION: Mr James McCully

 

Dear Mr McCully

The application for a Identification Plate Approval, your reference number CAWCS7903, our reference number 47230, lodged for Jenkins Springs Pty Ltd, has been approved.

Your approval number is 47230 and the approval documents are attached.

Yours sincerely

David Morton

Associate Administrator of Vehicle Standards

13 March 2018

 

 

 

 

 

 

 

GPO Box 594 Canberra ACT 2601 Telephone: (02) 6274 7111 Facsimile: (02) 6274 7477 http://rvcs.infrastructure.gov.au/

 

Department of Infrastructure and Regional Development and Cities

MOTOR VEHICLE STANDARDS ACT 1989

Section 10A.(1) Approval

Approval No.: 47230

Issue date: 13 March 2018

The Associate Administrator of Vehicle Standards (the Associate Administrator) approves the affixing, by the Licensee named and described in Schedule 1 (the Licensee) to a vehicle of the kind described in Schedule 2 which conforms to the design as specified in the evidence items listed in Schedule 4 (the specified vehicle) which the Licensee has certified complies with the Australian Design Rules specified in Schedule 4, of an Identification Plate of the colour specified in Schedule 3, that conforms with the Administrator’s circular 0-3-2, and which contains the information shown in Schedule 2 (with the typical VIN replaced with the relevant VIN).

In this approval, a reference to an Australian Design Rule is a reference to a rule cited in the National Standard determinations, made under section 7 of the Motor Vehicle Standards Act, together with that rule’s distinguishing number.

The licensee must pay a fee to the Commonwealth, in accordance with Regulation 60 and Items 1 and 2 of Schedule 2 of the Motor Vehicle Standards Regulations, for the placement of an identification plate on each new vehicle supplied to the market in Australia in accordance with the approval. The administrative arrangements for the payment of fees are set out in Administrator’s Circular 0-3-2. Where a condition exists in Schedule 5 of the approval for the licensee to obtain plates through the Authorised Plate Contractor, this fee is collected as part of that process.

This approval is subject to the following conditions.

  1. The Licensee shall not affix the Identification Plate to a vehicle that is not a specified vehicle.
  2. The Licensee must not place Identification Plates on vehicles which do not comply with all of the Australian Design Rules specified in Schedule 4.
  3. The Licensee shall not without the prior approval of the Administrator affix the Identification Plate to a vehicle that is in any way different from the vehicle described in the final form of the application for this Approval. The application includes reports and other documents relating to the application.
  4. The Licensee shall by detailed quality control and test ensure continuing compliance with such of the Australian Design Rules specified in Schedule 4.
  5. The Licensee shall maintain records of detailed quality control and test documentation.
  6. The Licensee shall supply upon request, to the satisfaction of the Administrator, any additional information for the purpose of demonstrating compliance with such of the Australian Design Rules specified in Schedule 4.
  7. The Licensee shall not affix the Identification Plate to a vehicle on or after the implementation date for a new Australian Design Rule applicable to the specified vehicle.
  8. The Licensee shall not affix the Identification Plate to a vehicle on or after the Expiry date specified in Schedule 3 (if any).
  9. The Identification Plate shall be affixed to the vehicle to which it relates in the position specified as Plate Location in Schedule 3.
  10. On cessation of marketing the specified vehicle in Australia, the Licensee shall notify the Administrator of the date of manufacture and VIN of the last specified vehicle supplied to the market in Australia.
  11. The Licensee shall also comply with the additional conditions specified in Schedule 5.

Approval No.: 47230 Issue Date: 13 March 2018

Schedule 1

Jenkins Springs Pty Ltd

188 Railway Parade

BASSENDEAN

WA 6054

 

Schedule 2

Make : TOYOTA

Model : WCS79.01

Category : NB1

Manufactured by : Jenkins Springs Pty Ltd

Typical VIN : VTELV71J900019317

Seating Capacity : 2; 5

GVM : 3.51 tonne TO 3.9 tonne

 

Schedule 3

Expiry date : Life of Model

Plate location : FIREWALL

Plate colour : SILVER

David Morton

Associate Administrator of Vehicle Standards

13 March 2018

Please note: If you do not comply with a condition specified in this Approval the Administrator may, after giving you notice, revoke the Approval.

Approval No.: 47230 Issue Date: 13 March 2018

Schedule 4

ADR Document Reference from evidence item

01/00 01/00WCS7901

03/03 03/03WCS7901

04/05 04/05WCS7901

05/05 05/05WCS7901

06/00 06/00WCS7901

06/00 0600WCS7902

06/00 0600WCS7903

08/01 08/01WCS7901

11/00 11/00WCS7901

13/00 13/00WCS7901

14/02 14/02WCS7901

18/03 18/03WCS7901

30/01 30/01WCS7901

35/05 35/05WCS7901

35/05 35/05WCS7902

35/05 35/05WCS7903

42/04 42/04WCS7901

43/04 43/04WCS7902

43/04 4304WCS7903

46/00 46/00WCS7901

47/00 47/00WCS7901

48/00 48/00WCS7901

49/00 49/00WCS7901

50/00 50/00WCS7901

51/00 51/00WCS7901

61/02 61/02WCS01

61/02 61/02WCS7901

80/03 80/03WCS7902 (Non-Standard, see Schedule 5)

80/03 80/03WCS7903

83/00 83/00WCS7901

Approval No.: 47230 Issue Date: 13 March 2018

Schedule 5

 

 

1. This TOYOTA Model WCS79.01 approval is for a second stage manufacture of Approval No. 3477 TOYOTA Model Landcruiser 4WD issued on 4 April 1979.

2. Non compliance with ADR 80/03 is declared. Extension of Approval has been sought for ADR 79/03.

3. The Licensee must obtain all second-stage Identification Plates from the Administrator, as per the contract approved by the Administrator for the supply of Identification Plates, currently with:

Niddrie Nameplates Pty Ltd

P.O. Box 106

Niddrie

VIC 3042

Phone: (03) 9335 2977

Facsimile: (03) 9335 4357