Jenkins Springs Pty Ltd

PO Box 398

BASSENDEAN WA 6934

ATTENTION: Mr James McCully

 

Dear Mr McCully

The application for a Identification Plate Approval, your reference number CAWCSHC05, our reference number 49093, lodged for Jenkins Springs Pty Ltd, has been approved.

Your approval number is 49093 and the approval documents are attached.

Yours sincerely

Umesh Shamdasani

Associate Administrator of Vehicle Standards

14 February 2018

 

 

 

 

 

 

 

GPO Box 594 Canberra ACT 2601 Telephone: (02) 6274 7111 Facsimile: (02) 6274 7477 http://rvcs.infrastructure.gov.au/

 

Department of Infrastructure and Regional Development and Cities

MOTOR VEHICLE STANDARDS ACT 1989

Section 10A.(1) Approval

Approval No.: 49093

Issue date: 14 February 2018

The Associate Administrator of Vehicle Standards (the Associate Administrator) approves the affixing, by the Licensee named and described in Schedule 1 (the Licensee) to a vehicle of the kind described in Schedule 2 which conforms to the design as specified in the evidence items listed in Schedule 4 (the specified vehicle) which the Licensee has certified complies with the Australian Design Rules specified in Schedule 4, of an Identification Plate of the colour specified in Schedule 3, that conforms with the Administrator’s circular 0-3-2, and which contains the information shown in Schedule 2 (with the typical VIN replaced with the relevant VIN).

In this approval, a reference to an Australian Design Rule is a reference to a rule cited in the National Standard determinations, made under section 7 of the Motor Vehicle Standards Act, together with that rule’s distinguishing number.

The licensee must pay a fee to the Commonwealth, in accordance with Regulation 60 and Items 1 and 2 of Schedule 2 of the Motor Vehicle Standards Regulations, for the placement of an identification plate on each new vehicle supplied to the market in Australia in accordance with the approval. The administrative arrangements for the payment of fees are set out in Administrator’s Circular 0-3-2. Where a condition exists in Schedule 5 of the approval for the licensee to obtain plates through the Authorised Plate Contractor, this fee is collected as part of that process.

This approval is subject to the following conditions.

  1. The Licensee shall not affix the Identification Plate to a vehicle that is not a specified vehicle.
  2. The Licensee must not place Identification Plates on vehicles which do not comply with all of the Australian Design Rules specified in Schedule 4.
  3. The Licensee shall not without the prior approval of the Administrator affix the Identification Plate to a vehicle that is in any way different from the vehicle described in the final form of the application for this Approval. The application includes reports and other documents relating to the application.
  4. The Licensee shall by detailed quality control and test ensure continuing compliance with such of the Australian Design Rules specified in Schedule 4.
  5. The Licensee shall maintain records of detailed quality control and test documentation.
  6. The Licensee shall supply upon request, to the satisfaction of the Administrator, any additional information for the purpose of demonstrating compliance with such of the Australian Design Rules specified in Schedule 4.
  7. The Licensee shall not affix the Identification Plate to a vehicle on or after the implementation date for a new Australian Design Rule applicable to the specified vehicle.
  8. The Licensee shall not affix the Identification Plate to a vehicle on or after the Expiry date specified in Schedule 3 (if any).
  9. The Identification Plate shall be affixed to the vehicle to which it relates in the position specified as Plate Location in Schedule 3.
  10. On cessation of marketing the specified vehicle in Australia, the Licensee shall notify the Administrator of the date of manufacture and VIN of the last specified vehicle supplied to the market in Australia.
  11. The Licensee shall also comply with the additional conditions specified in Schedule 5.

Approval No.: 49093 Issue Date: 14 February 2018

Schedule 1

Jenkins Springs Pty Ltd

188 Railway Parade

BASSENDEAN

WA 6054

 

Schedule 2

Make : WCS HOLDEN

Model : WCS HOLDEN COLORADO

Category : NA

Manufactured by : Jenkins Springs Pty Ltd

Typical VIN : MMU147CK0HH000007

Seating Capacity : 2; 4; 5

GVM : 3.3 tonne TO 3.3 tonne

 

Schedule 3

Expiry date : Life of Model

Plate location : Right Hand of B pillar of standard vehicle and on C pillar on extended cab

Plate colour : GREEN

Umesh Shamdasani

Associate Administrator of Vehicle Standards

14 February 2018

Please note: If you do not comply with a condition specified in this Approval the Administrator may, after giving you notice, revoke the Approval.

Approval No.: 49093 Issue Date: 14 February 2018

Schedule 4

ADR Document Reference from evidence item

01/00 0100WCSHC02

02/01 0201WCSHC02

03/03 0303WCSHC02

04/05 0405WCSHC02

05/05 0505WCSHC02

06/00 0600WCSHC02

08/01 0801WCSHC02

11/00 1100WCSHC02

13/00 1300WCSHC02

14/02 1402WCSHC02

18/03 1803WCSHC02

23/02 (also satisfying 23/01) 2302WCSHC02

23/02 2302WCSHC02

25/02 2502WCSHC02

30/01 3001WCSHC02

31/03 3103WCSHC01

35/05 (also satisfying 31/03) 3505WCSHC01

35/05 (also satisfying 31/04) 3505WCSHC01

31/35SF 31SFWCSHC01

35/05 3505WCSHC01

31/03 (also satisfying 35/05) 3103WCSHC01

42/04 4204WCSHC07

43/04 4304WCSHC02

46/00 4600WCSHC03

47/00 4700WCSHC03

48/00 4800WCSHC03

49/00 4900WCSHC03

51/00 5100WCSHC03

61/02 6102WCSHC04

62/02 6202WCSHC02

79/04 7904WCSHC02

81/02 8102WCSHC03

83/00 8300WCSHC02

Approval No.: 49093 Issue Date: 14 February 2018

Schedule 5

 

 

1. The Licensee to whom this Approval is issued is limited to placing Identification Plates to no more than 100 vehicles within each 12 month period, following the date of issue of the approval, to vehicles within the Category specified in Schedule This vehicle limit applies regardless of the number of Approvals the Licensee may hold.

2. The Licensee must obtain all identification plates from a plate contractor approved by the Administrator. Currently the contractor approved by the Administrator for the supply of Identification Plates is:-

Niddrie Nameplates Pty Ltd

P.O. Box 106

Niddrie

VIC 3042

Phone: (03) 9335 2977

Facsimile: (03) 9335 4357

This WCS HOLDEN(Vehicle Make) WCS HOLDEN COLORADO(Vehicle Model) approval is based on a second-stage-manufacture GVM UPGRADE based on the first-stage Approval No. 47708 HOLDEN RG first issued on the 3rd May 2016