Leisure Freight & Import Pty Ltd

GPO Box 322

BRISBANE QLD 4001

ATTENTION: Ms Dianne Lyons

 

Dear Ms Lyons

The application for a Identification Plate Approval, your reference number 12201CAT, our reference number 43326, lodged for Leisure Freight & Import Pty Ltd, has been approved.

Your approval number is 43326 and the approval documents are attached.

Yours sincerely

for Administrator of Vehicle Standards

21 March 2011

 

 

 

 

 

 

 

 

GPO Box 594 Canberra ACT 2601 Telephone: (02) 6274 7111 Facsimile: (02) 6274 7477 http://rvcs.infrastructure.gov.au/

 

Department of Infrastructure and Transport

MOTOR VEHICLE STANDARDS ACT 1989

Section 10A.(1) Approval

Approval No.: 43326

Issue date: 18 March 2011

The Administrator of Vehicle Standards (the Administrator) approves the affixing, by the Licensee named and described in Schedule 1 (the Licensee) to a vehicle of the kind described in Schedule 2 which conforms to the design as specified in the evidence items listed in Schedule 4 (the specified vehicle) which the Licensee has certified complies with the Australian Design Rules specified in Schedule 4, of an Identification Plate of the colour specified in Schedule 3, that conforms with the Administratorís circular 0-3-2, and which contains the information shown in Schedule 2 (with the typical VIN replaced with the relevant VIN).

In this approval, a reference to an Australian Design Rule is a reference to a rule cited in the National Standard determinations, made under section 7 of the Motor Vehicle Standards Act, together with that ruleís distinguishing number.

The licensee must pay a fee to the Commonwealth, in accordance with Regulation 60 and Items 1 and 2 of Schedule 2 of the Motor Vehicle Standards Regulations, for the placement of an identification plate on each new vehicle supplied to the market in Australia in accordance with the approval. The administrative arrangements for the payment of fees are set out in Administratorís Circular 0-3-2. Where a condition exists in Schedule 5 of the approval for the licensee to obtain plates through the Authorised Plate Contractor, this fee is collected as part of that process.

This approval is subject to the following conditions.

  1. The Licensee shall not affix the Identification Plate to a vehicle that is not a specified vehicle.
  2. The Licensee must not place Identification Plates on vehicles which do not comply with all of the Australian Design Rules specified in Schedule 4.
  3. The Licensee shall not without the prior approval of the Administrator affix the Identification Plate to a vehicle that is in any way different from the vehicle described in the final form of the application for this Approval. The application includes reports and other documents relating to the application.
  4. The Licensee shall by detailed quality control and test ensure continuing compliance with such of the Australian Design Rules specified in Schedule 4.
  5. The Licensee shall maintain records of detailed quality control and test documentation.
  6. The Licensee shall supply upon request, to the satisfaction of the Administrator, any additional information for the purpose of demonstrating compliance with such of the Australian Design Rules specified in Schedule 4.
  7. The Licensee shall not affix the Identification Plate to a vehicle on or after the implementation date for a new Australian Design Rule applicable to the specified vehicle.
  8. The Licensee shall not affix the Identification Plate to a vehicle on or after the Expiry date specified in Schedule 3 (if any).
  9. The Identification Plate shall be affixed to the vehicle to which it relates in the position specified as Plate Location in Schedule 3.
  10. On cessation of marketing the specified vehicle in Australia, the Licensee shall notify the Administrator of the date of manufacture and VIN of the last specified vehicle supplied to the market in Australia.
  11. The Licensee shall also comply with the additional conditions specified in Schedule 5.

Approval No.: 43326 Issue Date: 18 March 2011

Schedule 1

Leisure Freight & Import Pty Ltd

104 Morris Circuit

THORNLANDS

QLD 4164

 

Schedule 2

Make : LEISURE FREIGHT

Model : PIG2

Category : TC

Manufactured by : Leisure Freight & Import Pty Ltd

Typical VIN : 47GAS3038BB000057

ATM : 8.95 tonnes

 

Schedule 3

Expiry date : Life of Model

Plate location : LHS MAIN RAIL TOWARDS FRONT

Plate colour : SILVER

Administrator of Vehicle Standards

18 March 2011

Please note: If you do not comply with a condition specified in this Approval the Administrator may, after giving you notice, revoke the Approval.

Approval No.: 43326 Issue Date: 18 March 2011

Schedule 4

ADR Document Reference from evidence item

01/00 0100

13/00 STD13

38/03 RRR01 12201

42/04 SE4204

43/04 SE4304

45/01 4501

47/00 4700

48/00 4800

49/00 4900

51/00 5100

61/02 SE6102

62/02 SE6202

Approval No.: 43326 Issue Date: 18 March 2011

Schedule 5

 

1.The Licensee must obtain all identification plates from the plate contractor approved by the Administrator. Currently the contractor approved by the Administrator for the supply of Identification Plates is:

 

Niddrie Nameplates Pty Ltd

P.O. Box 106

NIDDRIE VIC 3042

Phone: (03) 9335 2977

Facsimile: (03) 9335 4357