Bayerische Motoren Werke AG

PO Box 745

MULGRAVE VIC 3170

AUSTRALIA

ATTENTION: Mr Stephan Rausch

 

Dear Mr Rausch

The application for a Identification Plate Approval, your reference number 0101014A1, our reference number 47254, lodged for Bayerische Motoren Werke AG, has been approved.

Your approval number is 47254 and the approval documents are attached.

Yours sincerely

Martin Handley

Associate Administrator of Vehicle Standards

22 June 2015

 

 

 

 

 

 

 

GPO Box 594 Canberra ACT 2601 Telephone: (02) 6274 7111 Facsimile: (02) 6274 7477 http://rvcs.infrastructure.gov.au/

 

Department of Infrastructure and Regional Development

MOTOR VEHICLE STANDARDS ACT 1989

Section 10A.(1) Approval

Approval No.: 47254

Issue date: 22 June 2015

The Administrator of Vehicle Standards (the Administrator) approves the affixing, by the Licensee named and described in Schedule 1 (the Licensee) to a vehicle of the kind described in Schedule 2 which conforms to the design as specified in the evidence items listed in Schedule 4 (the specified vehicle) which the Licensee has certified complies with the Australian Design Rules specified in Schedule 4, of an Identification Plate of the colour specified in Schedule 3, that conforms with the Administrator’s circular 0-3-2, and which contains the information shown in Schedule 2 (with the typical VIN replaced with the relevant VIN).

In this approval, a reference to an Australian Design Rule is a reference to a rule cited in the National Standard determinations, made under section 7 of the Motor Vehicle Standards Act, together with that rule’s distinguishing number.

The licensee must pay a fee to the Commonwealth, in accordance with Regulation 60 and Items 1 and 2 of Schedule 2 of the Motor Vehicle Standards Regulations, for the placement of an identification plate on each new vehicle supplied to the market in Australia in accordance with the approval. The administrative arrangements for the payment of fees are set out in Administrator’s Circular 0-3-2. Where a condition exists in Schedule 5 of the approval for the licensee to obtain plates through the Authorised Plate Contractor, this fee is collected as part of that process.

This approval is subject to the following conditions.

  1. The Licensee shall not affix the Identification Plate to a vehicle that is not a specified vehicle.
  2. The Licensee must not place Identification Plates on vehicles which do not comply with all of the Australian Design Rules specified in Schedule 4.
  3. The Licensee shall not without the prior approval of the Administrator affix the Identification Plate to a vehicle that is in any way different from the vehicle described in the final form of the application for this Approval. The application includes reports and other documents relating to the application.
  4. The Licensee shall by detailed quality control and test ensure continuing compliance with such of the Australian Design Rules specified in Schedule 4.
  5. The Licensee shall maintain records of detailed quality control and test documentation.
  6. The Licensee shall supply upon request, to the satisfaction of the Administrator, any additional information for the purpose of demonstrating compliance with such of the Australian Design Rules specified in Schedule 4.
  7. The Licensee shall not affix the Identification Plate to a vehicle on or after the implementation date for a new Australian Design Rule applicable to the specified vehicle.
  8. The Licensee shall not affix the Identification Plate to a vehicle on or after the Expiry date specified in Schedule 3 (if any).
  9. The Identification Plate shall be affixed to the vehicle to which it relates in the position specified as Plate Location in Schedule 3.
  10. On cessation of marketing the specified vehicle in Australia, the Licensee shall notify the Administrator of the date of manufacture and VIN of the last specified vehicle supplied to the market in Australia.

Approval No.: 47254 Issue Date: 22 June 2015

Schedule 1

Bayerische Motoren Werke AG

BMW AG Dept ES-515

Werk 01.40 Hufelandstra 4 & 5

Munchen

GERMANY

 

Schedule 2

Make : BMW

Model : ALPINA F32

Category : MA

Manufactured by : Bayerische Motoren Werke AG

Typical VIN : WAPBF3200FER20041

Seating Capacity : 4

 

Schedule 3

Expiry date : Life of Model

Plate location : At the base of the left hand side (passenger side) B pillar

Plate colour : GREY

Martin Handley

Associate Administrator of Vehicle Standards

22 June 2015

Please note: If you do not comply with a condition specified in this Approval the Administrator may, after giving you notice, revoke the Approval.

Approval No.: 47254 Issue Date: 22 June 2015

Schedule 4

ADR Document Reference from evidence item

01/00 0101014-01

02/01 0101014-02

03/03 0101014-03

03/03 0101014-03A

04/05 0101014-04A

04/05 0101014-04B

04/05 0101014-04C

05/05 0101014-05

06/00 0101014-6F

06/00 0101014-6F1

06/00 0101014-6R

06/00 0101014-6S

08/01 0101014-08

10/02 (also satisfying 10/01) 0101014-10

10/02 0101014-10

11/00 0101014-11

13/00 0101014-13

14/02 0101014-14

18/03 0101014-18

21/00 0101014-21

23/02 (also satisfying 23/01) 0101014-23

23/02 0101014-23

25/02 0101014-25

29/00 0101014-29

31/03 (also satisfying 31/02) 0101014-31

31/03 0101014-31

31/35SF 0101014-31F

34/02 (also satisfying 34/01) 0101014-34

34/02 0101014-34

42/04 0101014-42

43/04 0101014-43

44/02 0101014-44

45/01 0101014-45

46/00 0101014-46

46/00 0101014-46A

46/00 0101014-46B

77/00 (also satisfying 46/00) 0101014-77

77/00 (also satisfying 46/00) 0101014-77A

47/00 0101014-47

48/00 0101014-48

49/00 0101014-49C

49/00 0101014-49F1

49/00 0101014-49F2

49/00 0101014-49R

49/00 0101014-49S

50/00 0101014-50

50/00 0101014-50A

51/00 0101014-51

52/00 0101014-52

60/00 0101014-60

61/02 0101014-61

62/02 0101014-62

69/00 0101014-69

72/00 0101014-72

73/00 0101014-73

75/00 0101014-75

76/00 0101014-76

76/00 0101014-76A

76/00 0101014-76B

77/00 0101014-77

77/00 0101014-77A

78/00 0101014-78

79/04 SF (also satisfying 79/02SF) 0101014-79F

79/04 (also satisfying 79/03) 0101014-79

79/04 SF (also satisfying 79/03 SF) 0101014-79F

79/04 0101014-79

79/04 SF 0101014-79F

81/02 0101014-81

81/02 SF 0101014-81F

82/00 0101014-82

83/00 0101014-83