Toyota Motor Corporation Australia Limited

Regulations Administration Department Product Development Division

GPO Box 2006S

MELBOURNE VIC 3001

ATTENTION: Mr Philip McKenzie

 

Dear Mr McKenzie

The application for a Identification Plate Approval, your reference number CA-G150-CP, our reference number 33886, lodged for Toyota Motor Corporation Australia Limited, has been approved.

Your approval number is 33886 and the approval documents are attached.

Yours sincerely

for Administrator of Vehicle Standards

23 March 2011

 

 

 

 

 

 

 

 

GPO Box 594 Canberra ACT 2601 Telephone: (02) 6274 7111 Facsimile: (02) 6274 7477 http://rvcs.infrastructure.gov.au/

 

Department of Infrastructure and Transport

MOTOR VEHICLE STANDARDS ACT 1989

Section 10A.(1) Approval

Approval No.: 33886

Issue date: 23 March 2011

The Administrator of Vehicle Standards (the Administrator) approves the affixing, by the Licensee named and described in Schedule 1 (the Licensee) to a vehicle of the kind described in Schedule 2 which conforms to the design as specified in the evidence items listed in Schedule 4 (the specified vehicle) which the Licensee has certified complies with the Australian Design Rules specified in Schedule 4, of an Identification Plate of the colour specified in Schedule 3, that conforms with the Administrator’s circular 0-3-2, and which contains the information shown in Schedule 2 (with the typical VIN replaced with the relevant VIN).

In this approval, a reference to an Australian Design Rule is a reference to a rule cited in the National Standard determinations, made under section 7 of the Motor Vehicle Standards Act, together with that rule’s distinguishing number.

The licensee must pay a fee to the Commonwealth, in accordance with Regulation 60 and Items 1 and 2 of Schedule 2 of the Motor Vehicle Standards Regulations, for the placement of an identification plate on each new vehicle supplied to the market in Australia in accordance with the approval. The administrative arrangements for the payment of fees are set out in Administrator’s Circular 0-3-2. Where a condition exists in Schedule 5 of the approval for the licensee to obtain plates through the Authorised Plate Contractor, this fee is collected as part of that process.

This approval is subject to the following conditions.

  1. The Licensee shall not affix the Identification Plate to a vehicle that is not a specified vehicle.
  2. The Licensee must not place Identification Plates on vehicles which do not comply with all of the Australian Design Rules specified in Schedule 4.
  3. The Licensee shall not without the prior approval of the Administrator affix the Identification Plate to a vehicle that is in any way different from the vehicle described in the final form of the application for this Approval. The application includes reports and other documents relating to the application.
  4. The Licensee shall by detailed quality control and test ensure continuing compliance with such of the Australian Design Rules specified in Schedule 4.
  5. The Licensee shall maintain records of detailed quality control and test documentation.
  6. The Licensee shall supply upon request, to the satisfaction of the Administrator, any additional information for the purpose of demonstrating compliance with such of the Australian Design Rules specified in Schedule 4.
  7. The Licensee shall not affix the Identification Plate to a vehicle on or after the implementation date for a new Australian Design Rule applicable to the specified vehicle.
  8. The Licensee shall not affix the Identification Plate to a vehicle on or after the Expiry date specified in Schedule 3 (if any).
  9. The Identification Plate shall be affixed to the vehicle to which it relates in the position specified as Plate Location in Schedule 3.
  10. On cessation of marketing the specified vehicle in Australia, the Licensee shall notify the Administrator of the date of manufacture and VIN of the last specified vehicle supplied to the market in Australia.

Approval No.: 33886 Issue Date: 23 March 2011

Schedule 1

Toyota Motor Corporation Australia Limited

155 Bertie Street

Port Melbourne

VIC 3207

 

Schedule 2

Make : TOYOTA

Model : HILUX 150 SER

Category : NA

Manufactured by : Toyota Motor Corporation Australia Limited

Typical VIN : MROCX12G200001001

Seating Capacity : 2; 3; 4; 5; 6

GVM : 2.71 tonne TO 2.875 tonne

 

Schedule 3

Expiry date : Life of Model

Plate location : At base of LHS Door B pillar for Single cab & Extra cab LHS C pillar for Double cab.

Plate colour : BLACK (LABEL)

Administrator of Vehicle Standards

23 March 2011

Please note: If you do not comply with a condition specified in this Approval the Administrator may, after giving you notice, revoke the Approval.

Approval No.: 33886 Issue Date: 23 March 2011

Schedule 4

ADR Document Reference from evidence item

01/00 01-G150-01

01/00 01-G150-02

02/00 02-G150-01

02/01 (also satisfying 02/00) 02-G150-02

02/01 02-G150-02

03/02 03-G150-01A

03/02 03-G150-02A

03/02 03-G150-03A

03/02 03-G150-04A

03/02 03-G150-05A

03/02 03-G150-06A

03/02 03-G150-07A

03/02 03-G150-08A

03/02 03-G150-09A

03/02 03-G150-09B

03/02 03-G150-10A

04/03 04-G150-01

04/03 04-G150-02

04/03 04-G150-03

04/03 04-G150-04

04/03 04-G150-05A

04/03 04-G150-06

04/03 04-G150-06A

04/03 04-G150-07

04/03 04-G150-08

04/03 04-G150-09

04/03 04-G150-09A

04/04 (also satisfying 04/03) 04-G150-10

04/04 (also satisfying 04/03) 04-G150-11

04/04 (also satisfying 04/03) 04-G150-12

04/04 (also satisfying 04/03) 04-G150-13

04/04 (also satisfying 04/03) 04-G150-14

04/04 (also satisfying 04/03) 04-G150-15

04/04 (also satisfying 04/03) 04-G150-16

04/04 (also satisfying 04/03) 04-G150-17

04/04 (also satisfying 04/03) 04-G150-18

04/04 (also satisfying 04/03) 04-G150-19

04/04 04-G150-10

04/04 04-G150-11

04/04 04-G150-12

04/04 04-G150-13

04/04 04-G150-14

04/04 04-G150-15

04/04 04-G150-16

04/04 04-G150-17

04/04 04-G150-18

04/04 04-G150-19

05/04 05-G150-01

05/04 05-G150-02

05/04 05-G150-03

05/04 05-G150-04

05/04 05-G150-05

06/00 06-G150-01

06/00 06-G150-02

06/00 06-G150-03

06/00 06-G150-04

06/00 06-G150-05

06/00 06-G150-06

08/01 08-G150-01

08/01 08-G150-02

08/01 08-G150-03

10/01 10-G150-01

10/01 (also satisfying 10/02) 10-G150-01

11/00 11-G150-01

11/00 11-G150-02

13/00 13-G150-01

13/00 13-G150-02

13/00 13-G150-03

13/00 13-G150-04

14/02 14-G150-01

14/02 14-G150-02

14/02 14-G150-03

14/02 14-G150-05

18/03 18-G150-02

18/03 18-G150-03

22/00 22-G150B-01A

22/00 22-G150B-02B

22/00 22-G150C-01A

22/00 22-G150D-01A

22/00 22-G150D-02B

23/02 (also satisfying 23/01) 23-G150-00

23/02 23-G150-00

25/02 25-G150-01

29/00 29-G150-01

30/01 30-G150-03A

30/01 31-G150-02

35/02 35-G150-00A

35/02 35-G150-01A

35/02 35-G150-02A

35/02 35-G150-02B

35/02 35-G150-03A

35/02 35-G150-03B

35/02 (also satisfying 35/03) 35-G150-00A

35/02 (also satisfying 35/03) 35-G150-01A

35/02 (also satisfying 35/03) 35-G150-02A

35/02 (also satisfying 35/03) 35-G150-02B

35/02 (also satisfying 35/03) 35-G150-03A

35/02 (also satisfying 35/03) 35-G150-03B

42/04 42-G150-01

42/04 42-G150-02

42/04 42-G150-03

42/04 42-G150-04

42/04 42-G150-05

42/04 42-G150-06

42/04 42-G150-07

42/04 42-G150-08

43/04 43-G150-01

43/04 43-G150-02

44/02 44-G150-01

46/00 46-G150-01

46/00 46-G150-02

47/00 47-G150-01

47/00 47-G150-02

47/00 47-G150-03

48/00 48-G150-01

48/00 48-G150-02

49/00 49-G150-01

49/00 49-G150-02

49/00 49-G150-03

49/00 49-G150-04

49/00 49-G150-05

49/00 49-G150-06

49/00 49-G150-07

49/00 49-G150-08

50/00 50-G150-00

50/00 50-G150-01

51/00 51-G150-01

51/00 51-G150-02

61/02 61-G150-01

61/02 61-G150-02

79/01SF 79SF-G150-08

79/01SF 79SF-G150-09

79/02 79-G150-04A

79/02 79-G150-05A

79/02 79-G150-06A

79/02 79-G150-07A

79/02 79-G150-08A

79/02 79-G150-12

79/02 79-G150-13

79/02 79-G150-14A

79/02 79-G150-14B

79/02 79-G150-15A

79/02 79-G150-15B

79/02 79-G150-16

79/02 79-G150-16B

79/02SF 79-G150-06A

79/02SF 79F-G150-03A

79/02SF 79F-G150-04A

79/02SF 79F-G150-05A

79/02SF 79F-G150-05B

79/02SF 79F-G150-07A

79/02SF 79F-G150-10

79/02SF 79F-G150-11

79/02SF 79F-G150-11A

79/02SF 79F-G150-12

79/02SF 79F-G150-12A

81/01SF 81F-G150-01A

81/01SF 81F-G150-01B

81/01SF 81F-G150-01C

81/01SF 81F-G150-02A

81/01SF 81F-G150-02B

81/01SF 81F-G150-02C

81/01SF 81F-G150-03A

81/01SF 81F-G150-04A

81/01SF 81F-G150-05A

81/01SF 81F-G150-06A

81/01SF 81F-G150-07A

81/01SF 81F-G150-08

81/01SF 81SF-G150-03

81/01SF 81SF-G150-04

81/01SF 81SF-G150-05

81/01SF 81SF-G150-06

81/01SF 81SF-G150-07

81/02 812-G150-01

81/02 812-G150-02

81/02 812-G150-03

81/02 812-G150-04

81/02 812-G150-05

81/02 812-G150-06

81/02 812-G150-07

81/02 812-G150-08

81/02 812-G150-09

81/02 812-G150-10

81/02 812-G150-11

81/02 812-G150-12

81/02 812-G150-13

81/02 812-G150-14

81/02 812-G150-15

81/02 812-G150-16

81/02 812-G150-17

83/00 83-G150-01

83/00 83-G150-02

83/00 83-G150-03

83/00 83-G150-04

83/00 83-G150-05

83/00 83-G150-06

83/00 83-G150-07

83/00 83-G150-08

83/00 83-G150-09

83/00 83-G150-10A

83/00SF 83-G150-04

83/00SF 83F-G150-06A

83/00SF 83SF-G150-01

83/00SF 83SF-G150-02

83/00SF 83SF-G150-03

83/00SF 83SF-G150-05