Jenkins Springs Pty Ltd
PO Box 398
BASSENDEAN WA 6934
ATTENTION:
Mr James McCully
Dear Mr McCully
The application for a Identification Plate Approval, your reference number CAWCSIDM05, our reference number 49113, lodged for Jenkins Springs Pty Ltd, has been approved.
Your approval number is 49113 and the approval documents are attached.
Yours sincerely
Umesh Shamdasani
Associate Administrator of Vehicle Standards
24 April 2018
GPO Box 594 Canberra ACT 2601 Telephone: (02) 6274 7111 Facsimile: (02) 6274 7477 http://rvcs.infrastructure.gov.au/
Department of Infrastructure and Regional Development and Cities
MOTOR VEHICLE STANDARDS ACT 1989
Section 10A.(3) Approval
Approval No.: 49113
Issue date: 23 April 2018
The Associate Administrator of Vehicle Standards (the Associate Administrator) approves the affixing, by the Licensee named and described in Schedule 1 (the Licensee) to a vehicle of the kind described in Schedule 2 which conforms to the design as specified in the evidence items listed in Schedule 4 (the specified vehicle) which the Licensee has certified complies with the Australian Design Rules specified in Schedule 4, of an Identification Plate of the colour specified in Schedule 3, that conforms with the Administrator’s circular 0-3-2, and which contains the information shown in Schedule 2 (with the typical VIN replaced with the relevant VIN).
In this approval, a reference to an Australian Design Rule is a reference to a rule cited in the National Standard determinations, made under section 7 of the Motor Vehicle Standards Act, together with that rule’s distinguishing number.
The licensee must pay a fee to the Commonwealth, in accordance with Regulation 60 and Items 1 and 2 of Schedule 2 of the Motor Vehicle Standards Regulations, for the placement of an identification plate on each new vehicle supplied to the market in Australia in accordance with the approval. The administrative arrangements for the payment of fees are set out in Administrator’s Circular 0-3-2. Where a condition exists in Schedule 5 of the approval for the licensee to obtain plates through the Authorised Plate Contractor, this fee is collected as part of that process.
This approval is subject to the following conditions.
Approval No.: 49113 Issue Date: 23 April 2018
Schedule 1
Jenkins Springs Pty Ltd
188 Railway Parade
BASSENDEAN
WA 6054
Schedule 2
Make : WCS ISUZU
Model : WCS ISUZU D-MAX
Category : NA
Manufactured by : Jenkins Springs Pty Ltd
Typical VIN : MPATFS85JHT100001
Seating Capacity : 2; 4; 5
GVM : 3.3 tonne TO 3.3 tonne
Schedule 3
Expiry date : Life of Model
Plate location : Right Hand of B pillar of standard vehicle and on C pillar on extended cab
Plate colour : GREEN
NEW LOW VOLUME
UP TO 100 VEHICLES PER ANNUM
Umesh Shamdasani
Associate Administrator of Vehicle Standards
23 April 2018
Please note: If you do not comply with a condition specified in this Approval the Administrator may, after giving you notice, revoke the Approval.
Approval No.: 49113 Issue Date: 23 April 2018
Schedule 4
ADR Document Reference from evidence item
01/00 0100WCSIDM03
02/01 0201WCSIDM03
03/03 0303WCSIDM03
04/05 0405WCSIDM03
05/05 0505WCSIDM03
06/00 0600WCSIDM03
08/01 0801WCSIDM03
11/00 1100WCSIDM03
13/00 1300WCSIDM04
14/02 1402WCSIDM03
18/03 1803WCSIDM03
23/02 (also satisfying 23/01) 2302WCSIDM03
23/02 2302WCSIDM03
25/02 2502WCSIDM03
30/01 3001WCSIDM03
31/03 3103WCSIDM01
35/05 (also satisfying 31/03) 3505WCSIDM01
35/05 (also satisfying 31/04) 3505WCSIDM01
31/35SF 31SFWCSIDM01
35/05 3505WCSIDM01
31/03 (also satisfying 35/05) 3103WCSIDM01
42/04 4204WCSIDM04
43/04 4304WCSIDM03
46/00 4600WCSIDM03
47/00 4700WCSIDM03
48/00 4800WCSIDM03
49/00 4900WCSIDM03
51/00 5100WCSIDM03
61/02 6102WCSIDM03
79/04 7904WCSIDM03
81/02 8102WCSIDM05
83/00 8300WCSIDM03
Approval No.: 49113 Issue Date: 23 April 2018
Schedule 5
1. WCS ISUZU/WCS ISUZU D-MAX approval is for a GVM UPGRADE second-stage-of-manufacture based on first-stage ISUZU/ D-MAX Approval No. 43971 issued on the 21 Feb 2012.
2. The Licensee to whom this Approval is issued is limited to placing Identification Plates to no more than 100 vehicles within each 12 month period, following the date of issue of the approval, to vehicles within the Category specified in Schedule This vehicle limit applies regardless of the number of Approvals the Licensee may hold.
3. The Licensee must obtain all identification plates from a plate contractor approved by the Administrator. Currently the contractor approved by the Administrator for the supply of Identification Plates is:-
Niddrie Nameplates Pty Ltd
P.O. Box 106
Niddrie
VIC 3042
Phone: (03) 9335 2977
Facsimile: (03) 9335 4357