Pedders Shock Absorber Service Pty Ltd

PO Box 247

NOBLE PARK VIC 3174

ATTENTION: Mr David Schneiders

 

Dear Mr Schneiders

The application for a Identification Plate Approval, your reference number CARGCOL4WD3, our reference number 45671, lodged for Pedders Shock Absorber Service Pty Ltd, has been approved.

Your approval number is 45671 and the approval documents are attached.

Yours sincerely

Martin Handley

Associate Administrator of Vehicle Standards

26 August 2015

 

 

 

 

 

 

 

GPO Box 594 Canberra ACT 2601 Telephone: (02) 6274 7111 Facsimile: (02) 6274 7477 http://rvcs.infrastructure.gov.au/

 

Department of Infrastructure and Regional Development

MOTOR VEHICLE STANDARDS ACT 1989

Section 10A.(1) Approval

Approval No.: 45671

Issue date: 26 August 2015

The Administrator of Vehicle Standards (the Administrator) approves the affixing, by the Licensee named and described in Schedule 1 (the Licensee) to a vehicle of the kind described in Schedule 2 which conforms to the design as specified in the evidence items listed in Schedule 4 (the specified vehicle) which the Licensee has certified complies with the Australian Design Rules specified in Schedule 4, of an Identification Plate of the colour specified in Schedule 3, that conforms with the Administrator’s circular 0-3-2, and which contains the information shown in Schedule 2 (with the typical VIN replaced with the relevant VIN).

In this approval, a reference to an Australian Design Rule is a reference to a rule cited in the National Standard determinations, made under section 7 of the Motor Vehicle Standards Act, together with that rule’s distinguishing number.

The licensee must pay a fee to the Commonwealth, in accordance with Regulation 60 and Items 1 and 2 of Schedule 2 of the Motor Vehicle Standards Regulations, for the placement of an identification plate on each new vehicle supplied to the market in Australia in accordance with the approval. The administrative arrangements for the payment of fees are set out in Administrator’s Circular 0-3-2. Where a condition exists in Schedule 5 of the approval for the licensee to obtain plates through the Authorised Plate Contractor, this fee is collected as part of that process.

This approval is subject to the following conditions.

  1. The Licensee shall not affix the Identification Plate to a vehicle that is not a specified vehicle.
  2. The Licensee must not place Identification Plates on vehicles which do not comply with all of the Australian Design Rules specified in Schedule 4.
  3. The Licensee shall not without the prior approval of the Administrator affix the Identification Plate to a vehicle that is in any way different from the vehicle described in the final form of the application for this Approval. The application includes reports and other documents relating to the application.
  4. The Licensee shall by detailed quality control and test ensure continuing compliance with such of the Australian Design Rules specified in Schedule 4.
  5. The Licensee shall maintain records of detailed quality control and test documentation.
  6. The Licensee shall supply upon request, to the satisfaction of the Administrator, any additional information for the purpose of demonstrating compliance with such of the Australian Design Rules specified in Schedule 4.
  7. The Licensee shall not affix the Identification Plate to a vehicle on or after the implementation date for a new Australian Design Rule applicable to the specified vehicle.
  8. The Licensee shall not affix the Identification Plate to a vehicle on or after the Expiry date specified in Schedule 3 (if any).
  9. The Identification Plate shall be affixed to the vehicle to which it relates in the position specified as Plate Location in Schedule 3.
  10. On cessation of marketing the specified vehicle in Australia, the Licensee shall notify the Administrator of the date of manufacture and VIN of the last specified vehicle supplied to the market in Australia.

Approval No.: 45671 Issue Date: 26 August 2015

Schedule 1

Pedders Shock Absorber Service Pty Ltd

6 Bridge Road

KEYSBOROUGH

VIC 3173

 

Schedule 2

Make : PEDDERS

Model : HOLDEN RG COLORADO 4WD

Category : NA

Manufactured by : Pedders Shock Absorber Service Pty Ltd

Typical VIN : MMU142DH0CH000007

Seating Capacity : 2; 3; 4; 5

GVM : 3.3 tonne TO 3.3 tonne

 

Schedule 3

Expiry date : Life of Model

Plate location : 30 L 16

Plate colour : SILVER

Martin Handley

Associate Administrator of Vehicle Standards

26 August 2015

Please note: If you do not comply with a condition specified in this Approval the Administrator may, after giving you notice, revoke the Approval.

Approval No.: 45671 Issue Date: 26 August 2015

Schedule 4

ADR Document Reference from evidence item

01/00 COL4WD0100-1

02/01 COL4WD0201-1

03/03 COL4WD0303-1

04/05 COL4WD0405-1

05/05 COL4WD0505-1

06/00 COL4WD0600-1

08/01 COL4WD0801-1

11/00 COL4WD1100-1

13/00 COL4WD1300-1

14/02 COL4WD1402-1

18/03 COL4WD1803-1

23/02 (also satisfying 23/01) COL4WD2302-1

23/02 COL4WD2302-1

25/02 COL4WD2502-1

31/02 (using 35/03) SE3503RGCOL4

35/04 (also satisfying 31/02) SE3504RGCOL6

31/35SF SF3503RGCOL4

31/35SF SF3503RGCOL6

35/04 SE3504RGCOL6

35/04 (using 35/03) SE3503RGCOL4

42/04 COL4WD4204-1

43/04 COL4WD4304-1

46/00 COL4WD4600-1

47/00 COL4WD4700-1

48/00 COLRG4WD4800

49/00 COL4WD4900-1

50/00 COL4WD5000-1

51/00 COL4WD5100-1

61/02 COL4WD6102-1

62/02 COL4WD6202-1

79/03 RG4WDADR7903

81/02 COL4WD8102-1

83/00 COL4WD8300-1