Fiat Auto S.p.A.
Peter L Smith Engineering P/L
14 Little Street
CAMDEN NSW 2570
AUSTRALIA
ATTENTION:
Mr Mauro Fantozzi
Dear Mr Fantozzi
I refer to the recent submission(s) for the Approval number 35521, held by Fiat Auto S.p.A..
Please find attached a list of evidence items which have been appended to this Approval. Please note, if there were other evidence items included in your submission(s) which are not listed here, those items are not yet considered to form part of your Approval.
Please note that you are required to comply with the additional conditions specified in the attached Schedule 5.
Yours sincerely
for Administrator of Vehicle Standards
26 May 2006Amendment to Approval No.: 35521
Issue Date: 25 May 2006
The Schedule 4 from the Approval issued on 08 March 2006 is amended to include the following :
ADR Document Reference from evidence item
03/02 939/03/03
05/04 939/05/01
08/01 939/08/01
23/01 939/23/02R
31/01SF 939/31/SF2
34/01 939/34/01
43/04 939/43/00R
43/04 939/43/01
49/00 939/49/04
73/00 939/73/01
79/01 939/79/01RR
79/01 939/79/02RR
79/02 939/79/00R
79/02 939/79/03R
81/01 939/81/04
81/01 939/81/06
81/01 939/81/07
81/01SF 939/81/SF2
83/00SF 939/83/SF2
Approval No.: 35521 Issue Date: 25 May 2006
Schedule 5
1. Vehicle does not comply with ADR 61/02 clause 9.1.1.2. Provision is made for mounting a registration plate to be affixed to the front of the vehicle at an angle of 18 degrees to a plane parallel to the front axle.
This non-compliance is minor and inconsequential.