Bustech Pty Ltd

12 Production Avenue

Ernest QLD 4214

ATTENTION: Mr Frank Reardon

 

Dear Mr Reardon

The application for a compliance plate approval, your reference number BUS03-CA-01, our reference number 31629, lodged for Bustech Pty Ltd, has been approved.

Your approval number is 31629 and the approval documents are attached.

Yours sincerely

 

 

 

 

for Administrator of Vehicle Standards

26 November 2003

 

 

Department of Transport and Regional Services

MOTOR VEHICLE STANDARDS ACT 1989

Section 10A.(1) Approval

 

Approval No.: 31629

Issue date: 25 November 2003

The Administrator of Vehicle Standards (the Administrator) approves the affixing, by the Licensee named and described in Schedule 1 (the Licensee) to a vehicle of the kind described in Schedule 2 which conforms to the design as specified in the evidence items listed in Schedule 4 (the specified vehicle) which the Licensee has certified complies with the Australian Design Rules specified in Schedule 4, of an Identification Plate of the colour specified in Schedule 3, that conforms with the Administrator’s circular 0-3-2, and which contains the information shown in Schedule 2 (with the typical VIN replaced with the relevant VIN).

In this approval, a reference to an Australian Design Rule is a reference to a rule cited in the National Standard determinations, made under section 7 of the Motor Vehicle Standards Act, together with that rule’s distinguishing number.

This approval is subject to the following conditions.

  1. The Licensee shall not affix the Identification Plate to a vehicle that is not a specified vehicle.
  2. The Licensee must not place Identification Plates on vehicles which do not comply with all of the Australian Design Rules specified in Schedule 4.
  3. The Licensee shall not without the prior approval of the Administrator affix the Identification Plate to a vehicle that is in any way different from the vehicle described in the final form of the application for this Approval. The application includes reports and other documents relating to the application.
  4. The Licensee shall by detailed quality control and test ensure continuing compliance with such of the Australian Design Rules specified in Schedule 4.
  5. The Licensee shall maintain records of detailed quality control and test documentation.
  6. The Licensee shall supply upon request, to the satisfaction of the Administrator, any additional information for the purpose of demonstrating compliance with such of the Australian Design Rules specified in Schedule 4.
  7. The Licensee shall not affix the Identification Plate to a vehicle on or after the implementation date for a new Australian Design Rule applicable to the specified vehicle.
  8. The Licensee shall not affix the Identification Plate to a vehicle on or after the Expiry date specified in Schedule 3 (if any).
  9. The Identification Plate shall be affixed to the vehicle to which it relates in the position specified as Plate Location in Schedule 3.
  10. On cessation of marketing the specified vehicle in Australia, the Licensee shall notify the Administrator of the date of manufacture and VIN of the last specified vehicle supplied to the market in Australia.

 

Approval No.: 31629 Issue Date: 25 November 2003

Schedule 1

Bustech Pty Ltd

12 Production Avenue

Ernest

QLD 4214

 

Schedule 2

Make : Bustech

Model : VST

Category : ME

Manufactured by : Bustech Pty Ltd

Typical VIN : YV3R8F8162A001023

Seating Capacity : 56

GVM : 19 tonne

 

Schedule 3

Expiry date : Life of Model

Plate location : Left side passenger entry stepwell

Plate colour : SILVER

 

Administrator of Vehicle Standards

Date:

Please note: If you do not comply with a condition specified in this Approval the Administrator may, after giving you notice, revoke the Approval.

Approval No.: 31629 Issue Date: 25 November 2003

Schedule 4

ADR Document Reference from evidence item

01/00 BUS03-01-01

04/03 BUS03-04-01

05/04 BUS03-05-01

06/00 BUS03-06-01

06/00 BUS03-06-02

06/00 BUS03-06-03

08/01 BUS03-08-01

08/01 BUS03-08-02

12/00 BUS03-12-01

13/00 BUS03-13-01

14/02 BUS03-14-01

15/01 BUS03-15-01

16/01 BUS03-16-01

18/02 BUS03-18-06

24/02 BUS03-24-06

28/01 BUS03-28-08A

28/01SF BUS03SF28-8A

30/01 BUS03-30-06

35/01 BUS03-35-06

42/03 BUS03-42-01

43/04 BUS03-43-01

44/02 BUS03-44-01

45/01 BUS03-45-01

46/00 BUS03-46-01

46/00 BUS03-46-02

47/00 BUS03-47-01

48/00 BUS03-48-01

49/00 BUS03-49-02

49/00 BUS03-49-03

49/00 BUS03-49-05

49/00 BUS03-49-06

51/00 BUS03-51-01

58/00 BUS03-58-01

59/00 BUS03-59-01

61/02 BUS03-61-01

65/00 BUS03-65-06

80/00 BUS03-80-06