Pedders Shock Absorber Service Pty Ltd

PO Box 247

NOBLE PARK VIC 3174

ATTENTION: Mr David Schneiders

 

Dear Mr Schneiders

The application for a Identification Plate Approval, your reference number 2HGVMCA-03, our reference number 46433, lodged for Pedders Shock Absorber Service Pty Ltd, has been approved.

Your approval number is 46433 and the approval documents are attached.

Yours sincerely

Umesh Shamdasani

Associate Administrator of Vehicle Standards

28 January 2016

 

 

 

 

 

 

 

GPO Box 594 Canberra ACT 2601 Telephone: (02) 6274 7111 Facsimile: (02) 6274 7477 http://rvcs.infrastructure.gov.au/

 

Department of Infrastructure and Regional Development

MOTOR VEHICLE STANDARDS ACT 1989

Section 10A.(1) Approval

Approval No.: 46433

Issue date: 28 January 2016

The Associate Administrator of Vehicle Standards (the Associate Administrator) approves the affixing, by the Licensee named and described in Schedule 1 (the Licensee) to a vehicle of the kind described in Schedule 2 which conforms to the design as specified in the evidence items listed in Schedule 4 (the specified vehicle) which the Licensee has certified complies with the Australian Design Rules specified in Schedule 4, of an Identification Plate of the colour specified in Schedule 3, that conforms with the Administratorís circular 0-3-2, and which contains the information shown in Schedule 2 (with the typical VIN replaced with the relevant VIN).

In this approval, a reference to an Australian Design Rule is a reference to a rule cited in the National Standard determinations, made under section 7 of the Motor Vehicle Standards Act, together with that ruleís distinguishing number.

The licensee must pay a fee to the Commonwealth, in accordance with Regulation 60 and Items 1 and 2 of Schedule 2 of the Motor Vehicle Standards Regulations, for the placement of an identification plate on each new vehicle supplied to the market in Australia in accordance with the approval. The administrative arrangements for the payment of fees are set out in Administratorís Circular 0-3-2. Where a condition exists in Schedule 5 of the approval for the licensee to obtain plates through the Authorised Plate Contractor, this fee is collected as part of that process.

This approval is subject to the following conditions.

  1. The Licensee shall not affix the Identification Plate to a vehicle that is not a specified vehicle.
  2. The Licensee must not place Identification Plates on vehicles which do not comply with all of the Australian Design Rules specified in Schedule 4.
  3. The Licensee shall not without the prior approval of the Administrator affix the Identification Plate to a vehicle that is in any way different from the vehicle described in the final form of the application for this Approval. The application includes reports and other documents relating to the application.
  4. The Licensee shall by detailed quality control and test ensure continuing compliance with such of the Australian Design Rules specified in Schedule 4.
  5. The Licensee shall maintain records of detailed quality control and test documentation.
  6. The Licensee shall supply upon request, to the satisfaction of the Administrator, any additional information for the purpose of demonstrating compliance with such of the Australian Design Rules specified in Schedule 4.
  7. The Licensee shall not affix the Identification Plate to a vehicle on or after the implementation date for a new Australian Design Rule applicable to the specified vehicle.
  8. The Licensee shall not affix the Identification Plate to a vehicle on or after the Expiry date specified in Schedule 3 (if any).
  9. The Identification Plate shall be affixed to the vehicle to which it relates in the position specified as Plate Location in Schedule 3.
  10. On cessation of marketing the specified vehicle in Australia, the Licensee shall notify the Administrator of the date of manufacture and VIN of the last specified vehicle supplied to the market in Australia.
  11. The Licensee shall also comply with the additional conditions specified in Schedule 5.

Approval No.: 46433 Issue Date: 28 January 2016

Schedule 1

Pedders Shock Absorber Service Pty Ltd

6 Bridge Road

KEYSBOROUGH

VIC 3173

 

Schedule 2

Make : Pedders Volkswagen

Model : Amarok 2H NA

Category : NA

Manufactured by : Pedders Shock Absorber Service Pty Ltd

Typical VIN : WV1ZZZ2HZDA060840

Seating Capacity : 2; 5

GVM : 3.285 tonne TO 3.285 tonne

 

Schedule 3

Expiry date : Life of Model

Plate location : 10 N 21

Plate colour : SILVER

Umesh Shamdasani

Associate Administrator of Vehicle Standards

28 January 2016

Please note: If you do not comply with a condition specified in this Approval the Administrator may, after giving you notice, revoke the Approval.

Approval No.: 46433 Issue Date: 28 January 2016

Schedule 4

ADR Document Reference from evidence item

01/00 2HADR0100

02/01 2HADR0201-1

03/03 2HADR0303-1

04/05 2HADR0405

05/05 2HADR0505-1

06/00 2HADR0600

08/01 2HADR0801

11/00 2HADR1100

13/00 2HADR1300

14/02 2HADR1402

18/03 2HADR1803

23/02 (also satisfying 23/01) 2HADR2302

23/02 2HADR2302

25/02 2HADR2502

29/00 2HADRSE2900

30/01 2HADR3001

31/02 (using 35/03) 2HSEADR3135

35/04 (also satisfying 31/02) 2HASE3504

35/04 (also satisfying 31/02) 2HASE35041

35/04 (also satisfying 31/02) 2HASE35042

31/35SF 2HSF31351

31/35SF 2HSF31352

31/35SF 2HSF31353

31/35SF 2HSFADR31351

31/35SF 2HSFADR31352

31/35SF 2HSFADR31353

31/35SF 2HSFADR31354

35/04 2HASE3504

35/04 2HASE35041

35/04 2HASE35042

35/04 (using 35/03) 2HSEADR3135

42/04 2HADR4204

42/04 2HGVMSE

42/04 2HGVMSE4204

43/04 2HADR4304

46/00 2HADR4600

47/00 2HADR4700

48/00 2HADR4800

49/00 2HADR4900

50/00 2HADR5000

51/00 2HADR5100

61/02 2HADR6102

79/03 2HADR7903-1

81/02 2HADR8102

83/00 2HADR8300

Approval No.: 46433 Issue Date: 28 January 2016

Schedule 5

 

 

1. This approval is for second-stage-of-manufacture Pedders Volkswagen Amarok 2HNA based on first-stage Approval No. 42538 Volkswagen Type 2H issued on 11 August 2010.

2. The Licensee must obtain all second-stage Identification Plates from the Administrator, as per the contract approved by the Administrator for the supply of Identification Plates, currently with:

Niddrie Nameplates Pty Ltd

P.O. Box 106

Niddrie

VIC 3042

Phone: (03) 9335 2977

Facsimile: (03) 9335 4357