Pedders Shock Absorber Service Pty Ltd
PO Box 247
NOBLE PARK VIC 3174
ATTENTION:
Mr David Schneiders
Dear Mr Schneiders
The application for a Identification Plate Approval, your reference number CAD23NAV1, our reference number 47533, lodged for Pedders Shock Absorber Service Pty Ltd, has been approved.
Your approval number is 47533 and the approval documents are attached.
Yours sincerely
Martin Handley
Associate Administrator of Vehicle Standards
30 September 2015
GPO Box 594 Canberra ACT 2601 Telephone: (02) 6274 7111 Facsimile: (02) 6274 7477 http://rvcs.infrastructure.gov.au/
Department of Infrastructure and Regional Development
MOTOR VEHICLE STANDARDS ACT 1989
Section 10A.(1) Approval
Approval No.: 47533
Issue date: 30 September 2015
The Associate Administrator of Vehicle Standards (the Associate Administrator) approves the affixing, by the Licensee named and described in Schedule 1 (the Licensee) to a vehicle of the kind described in Schedule 2 which conforms to the design as specified in the evidence items listed in Schedule 4 (the specified vehicle) which the Licensee has certified complies with the Australian Design Rules specified in Schedule 4, of an Identification Plate of the colour specified in Schedule 3, that conforms with the Administrator’s circular 0-3-2, and which contains the information shown in Schedule 2 (with the typical VIN replaced with the relevant VIN).
In this approval, a reference to an Australian Design Rule is a reference to a rule cited in the National Standard determinations, made under section 7 of the Motor Vehicle Standards Act, together with that rule’s distinguishing number.
The licensee must pay a fee to the Commonwealth, in accordance with Regulation 60 and Items 1 and 2 of Schedule 2 of the Motor Vehicle Standards Regulations, for the placement of an identification plate on each new vehicle supplied to the market in Australia in accordance with the approval. The administrative arrangements for the payment of fees are set out in Administrator’s Circular 0-3-2. Where a condition exists in Schedule 5 of the approval for the licensee to obtain plates through the Authorised Plate Contractor, this fee is collected as part of that process.
This approval is subject to the following conditions.
Approval No.: 47533 Issue Date: 30 September 2015
Schedule 1
Pedders Shock Absorber Service Pty Ltd
6 Bridge Road
KEYSBOROUGH
VIC 3173
Schedule 2
Make : Pedders Nissan
Model : Navara D23
Category : NA
Manufactured by : Pedders Shock Absorber Service Pty Ltd
Typical VIN : MNTCB2D23A0123456
Seating Capacity : 5
GVM : 3.07 tonne TO 3.07 tonne
Schedule 3
Expiry date : Life of Model
Plate location : 9 L 4
Plate colour : SILVER
Martin Handley
Associate Administrator of Vehicle Standards
30 September 2015
Please note: If you do not comply with a condition specified in this Approval the Administrator may, after giving you notice, revoke the Approval.
Approval No.: 47533 Issue Date: 30 September 2015
Schedule 4
ADR Document Reference from evidence item
01/00 D23NA0100
02/01 D23NA0201
03/03 D23NA0303
04/05 D23NA0405
05/05 D23NA0505
06/00 D23NA0600
08/01 D23NA0801
11/00 D23NA1100
13/00 D23NA1300
14/02 D23NA1402
18/03 D23NA1803
23/02 (also satisfying 23/01) D23NA2302
23/02 D23NA2302
25/02 D23NA2502
29/00 D23NA2900
30/01 D23NA3001
35/04 (also satisfying 31/02) SED23NA3504
31/35SF SF3135D23
35/04 SED23NA3504
42/04 D23NA4204
43/04 D23NA4304
46/00 D23NA4600
47/00 D23NA4700
48/00 D23NA4800
49/00 D23NA4900
50/00 D23NA5000
51/00 D23NA5100
61/02 D23NA6102
76/00 D23NA7600
79/04 (also satisfying 79/03) D23NA7904
79/04 D23NA7904
81/02 D23NA8102
83/00 D23NA8300